Heat Treatment and Press Forming Production Operations
The production site is equipped with plate-levelling and plate-bending machines. The three-roll plate bending machine with a top roll diameter of 1800 mm makes it possible to bend plates up to 4500 mm wide and up to 350 mm thick. Russia’s only 15120 ton-force capacity hydraulic forming machine allows to stamp heads with a diameter of up to 5000 mm and a plate thickness of up to 400 mm.
Equipment
Hydraulic forming machine
| Description | Double-acting hydraulic forming machine has no analogues in Russia. Equipment with a maximum capacity of 15000 ton-force is used for forming heads with a plate thickness of up to 380 mm and a diameter of up to 5000 mm.
|
| Main characteristics |
Maximum forming force: 15000 tf
Drawing slide force: up to 10 080 tf Blankholder slide force: up to 5 000 tf Slider stroke: 5,200 mm Distance between columns along the front of the press: 10,500 mm Plan dimensions: moving table - 9000 mm × 9000 mm blankholder slide - 9,000 mm × 9,000 mm drawing slide - 6500 × 6500 mm |
Chamber gas furnace with bogie hearth
| Description | The furna
The furnace is used for heat treatment of equipment for nuclear power plants. It allows to carry out quenching and tempering of large-sized articles, including reactor and STG vessels in the assembled condition. |
| Main characteristics |
Overall dimensions: 9,000 × 10,000 × 25,000 mm
Maximum operating temperature: 9200 °С Maximum charge weight: 600 t
|
Production Capabilities
01
02
Production meets modern standards. Finished equipment is delivered to different parts of the world.
